www.KitGuitarsForum.com

Learn to Kit Build a Guitar. Learn to Scratch Build a Guitar. Learn EVERYTHING Guitars Here!
It is currently Wed Oct 23, 2019 5:58 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Blunt chisel technique
PostPosted: Sat Mar 23, 2019 10:08 am 
Offline

Joined: Thu May 24, 2012 8:03 am
Posts: 1119
Location: Chestertown Maryland
The English perfected what is known as the infill plane. It is a plane (any length, any bedding angle) that is made of a metal shell with a wood insert at the toe and the heel. They are typically made with a mouth that is a few thou wide. The advantage is purported to be that they are very heavy and therefor easier to get through the wood, but tell that to the guy who uses wood bodied planes that weight 1/2 of what these guys weigh. I have used several and own one, but don't see the advantage as much as an acolyte does. They are simply gorgeous though. There are a lot of people who make these for sale ($500 - $10,000 or so), and even pre-cut kits, but the grandaddy of them all is Bill Carter:

[url]http://www.billcarterwoodworkingplanemaker.co.uk
[/url]

If you have a spare hour, this is a remarkable site. He even has a 30 part youtube series on making one of these, something that has been on my bucket list for a long time.

He is full of cool woodworking techniques throughout that series. and all of his videos, but here is one that we can all use once in a while, the Blunt Chisel Technique (said with an English accent):

https://www.youtube.com/watch?v=re_bp5Lp0To

I remember to use it only once in a while - I should hang a reminder in my chisel cabinet. I have a shallow gouge and 3/4" chisel set up - takes just a minute and works with any $2 flea market chisel of reasonable quality - think vintage as always.

Ed


Top
 Profile  
 
PostPosted: Sat Mar 23, 2019 3:59 pm 
Offline

Joined: Mon Jul 28, 2014 7:50 am
Posts: 674
Location: Chadds Ford, PA
Thanks, Ed. I watched the videos after seeing your earlier post. I can't wait to get over to the auction and procure some suitable chisels. Have you tried this with swan-necked chisels?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group