neck templates

Storebought or Homemade: Tell Us!
Post Reply
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

neck templates

Post by tippie53 »

here is a pick of a neck template
you may be able to print this out
You do not have the required permissions to view the files attached to this post.
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Bob Gleason
Posts: 412
Joined: Fri Jul 03, 2015 2:45 pm
Contact:

Re: neck templates

Post by Bob Gleason »

John- I've never used templates myself, but that's a nice jig design. Might just have to make some of those.Thanks for posting the samples.-Bob
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: neck templates

Post by Kevin Sjostrand »

Thanks John, I printed out and then enlarged by 118% to get it right size. I will use them!
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: neck templates

Post by tippie53 »

these also have the heel curves for the cheeks and from the heel to the barrel
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Bob Gleason
Posts: 412
Joined: Fri Jul 03, 2015 2:45 pm
Contact:

Re: neck templates

Post by Bob Gleason »

John-Knowing you, I'm surprised there is no beer opener on the jigs too! Have a great day!--Bob
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: neck templates

Post by tippie53 »

I can do that
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: neck templates

Post by Diane Kauffmds »

Thanks John
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Post Reply