Dremel holder
Posted: Fri Feb 16, 2018 7:26 pm
Stew Mac introduced this item this morning:
http://www.stewmac.com/Luthier_Tools/Ty ... B_20180216
My first thought was - another useless tool. But then I thought of a few things it would be good for- mostly polishing parts. I got a nut at the Ace Hardware for 83 cents, and glued it into a scrap of walnut 1-3/4" square. The nut is a 3/4" X 10 instead of the 3/4" X 12 of the Dremel, but it screws on for 1-1/2 revolutions and is quite stable. Works great.
Ed
http://www.stewmac.com/Luthier_Tools/Ty ... B_20180216
My first thought was - another useless tool. But then I thought of a few things it would be good for- mostly polishing parts. I got a nut at the Ace Hardware for 83 cents, and glued it into a scrap of walnut 1-3/4" square. The nut is a 3/4" X 10 instead of the 3/4" X 12 of the Dremel, but it screws on for 1-1/2 revolutions and is quite stable. Works great.
Ed