www.KitGuitarsForum.com
http://www.kitguitarsforum.com/board/

Ash Go-bars
http://www.kitguitarsforum.com/board/viewtopic.php?f=4&t=8180
Page 1 of 1

Author:  Kbore [ Tue Jul 04, 2017 9:49 pm ]
Post subject:  Ash Go-bars

So I bought a 6' x 3/4" ash board for $10 and cut 14 six foot go-bars. Deck / supports are under consideration. May just use 56" from my bench top to ceiling in basement. We'll see...

Author:  MaineGeezer [ Wed Jul 05, 2017 5:53 am ]
Post subject:  Re: Ash Go-bars

I use my bench and ceiling as my go-bar deck. It works well.

The ash rods should be quite acceptable. I made a few bars from a piece of hickory. They work, probably as well as the fiberglass rods I have. One does have to be on the watch for them taking a permanent set, but that's not a big deaL

Author:  tippie53 [ Wed Jul 05, 2017 6:37 am ]
Post subject:  Re: Ash Go-bars

figure about 10 lb per stick for clamps force

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/