Getting ready to do a cutaway

Storebought or Homemade: Tell Us!
Post Reply
Kevin Sjostrand
Posts: 3712
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Getting ready to do a cutaway

Post by Kevin Sjostrand »

I built my first cutaway guitar almost 5 years ago, when I was bending sides on a hot pipe. It was a dred. I have not done one since.
I have made a OM cutaway form and forming ram for my bending machine and plan on making my next guitar a OM with a cutaway.
Should be bending sides in the next couple of weeks, but the bender is now ready!
You do not have the required permissions to view the files attached to this post.
MaineGeezer
Posts: 1711
Joined: Wed Aug 13, 2014 12:14 pm

Re: Getting ready to do a cutaway

Post by MaineGeezer »

Good luck on the cutaway bend. I hope you have better luck than I did!
Don't believe everything you know.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion
Post Reply