Peghead thinning jig
Posted: Fri Feb 26, 2016 8:52 pm
Making my first neck - this one for a uke in Osage Orange. It is easy to flatten the face of the peghead, but thinning it in a consistent manner is not so easy. So I built a jig for use on my small belt sander. I have seen things like this but never gave it much thought until I had to make one:
https://www.flickr.com/photos/ruby1638/ ... 606115293/
This will do the same duty as a "luthier's friend" or a safe-t-planer'.
Ed
https://www.flickr.com/photos/ruby1638/ ... 606115293/
This will do the same duty as a "luthier's friend" or a safe-t-planer'.
Ed