Hey Guys -
I'm building a bending form to use with a heating blanket. You see those rods in the photos below? Some of them are a little proud of the edge of the wood. Is that going to be okay, or will I end up with lumps in my sides as I bend on the form.
Thanks,
Mike
Rods in Form
-
- Posts: 29
- Joined: Sun Jun 28, 2015 5:48 pm
- Location: Vancouver, WA
Rods in Form
You do not have the required permissions to view the files attached to this post.
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Rods in Form
not really the rods are more for separators it is the mold and speader that make the final shape
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 29
- Joined: Sun Jun 28, 2015 5:48 pm
- Location: Vancouver, WA
Re: Rods in Form
Great. Thanks John!