Inlay Grinder for Rosette Channels?

Storebought or Homemade: Tell Us!
Post Reply
Bobby M
Posts: 7
Joined: Fri Dec 11, 2015 3:18 pm

Inlay Grinder for Rosette Channels?

Post by Bobby M »

John,

I've asked Santa's wife (my mother in law) for your die grinder and base set for Christmas. Even if she doesn't come thru it's on my list of things to acquire. Is there a circle cutter attachment available to use with this for cutting rosette channels? I see on the Stewmac site that their "Soundhole and Rosette Routing Jig" works with Dremel and Foredom. Does it also work with your die grinder? I used to have the Stewmac but at the time was using a crummy Dremel and can't for the life of me remember what the hole size/threads etc are to know if it would work with your unit. If not, can you point me to a version that does?

Thanks!
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Inlay Grinder for Rosette Channels?

Post by tippie53 »

What I do is modify the stew mac units. I have one in stock so we can do that.
Can you give me a call?
570-682-8046
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply