Torrefied tops - Membership Benefit

Storebought or Homemade: Tell Us!
dave66
Posts: 39
Joined: Tue Jun 10, 2014 2:45 pm
Location: Forest of Dean, Gloucestershire, UK
Contact:

Re: Torrefied tops - Membership Benefit

Post by dave66 »

Thanks John.
I used CA on my first kit for the herringbone purfling and plastic binding. The cutter had slipped, so I had to add multiple b&w purfling strips and widen the rebate. I sealed the top with one coat shellac taped on all the strips, with gaps getween, then ran ca into the join.

Duco is very hard to find in the UK and I wasnt sure if the Ruderer plastic glue i had would glue the h/bone fibre and the plastic binding, so used ca - it came out real good.
You do not have the required permissions to view the files attached to this post.
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Torrefied tops - Membership Benefit

Post by tippie53 »

There is also a weldon glue airplane glue is also usable in a pinch. That looks good and if the result works that is perfect. The herringbone will also set with tite bond. Plastic doesn't set will with tite bond.
your binding pics look great
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
phavriluk
Posts: 554
Joined: Mon Jul 09, 2012 9:49 pm

Re: Torrefied tops - Membership Benefit

Post by phavriluk »

In my dim dark past, I used UHU 'Hart' glue for tasks that I'd used Duco cement for, and I don't recall seeing much of a difference. Perhaps that is more available in the UK.
peter havriluk
dave66
Posts: 39
Joined: Tue Jun 10, 2014 2:45 pm
Location: Forest of Dean, Gloucestershire, UK
Contact:

Re: Torrefied tops - Membership Benefit

Post by dave66 »

Thanks guys!
Kbore
Posts: 299
Joined: Sun Jun 25, 2017 3:58 pm
Location: St. Louis area

Re: Torrefied tops - Membership Benefit

Post by Kbore »

tippie53 wrote: I use duco cement for most of my rosettes. It I do pearl I still use the duco for the basic rosette and then tite bond on the pearl.
Eleven years after your post I have to ask why duco cement?

KB
Measure Twice,

Karl B
Diane Kauffmds
Posts: 3246
Joined: Sun Mar 09, 2014 8:13 pm

Re: Torrefied tops - Membership Benefit

Post by Diane Kauffmds »

Kbore wrote:
tippie53 wrote: I use duco cement for most of my rosettes. It I do pearl I still use the duco for the basic rosette and then tite bond on the pearl.
Eleven years after your post I have to ask why duco cement?

KB
Hi.

Duco cement gives adequate working time, is clear, and will glue all materials. For instance, titebond won't glue anything but wood or wood byproducts. CA glue will eventually discolor spruce unless the spruce has a finish applied first, plus there's no working time.

I like Duco for rossettes too. It has the best working time for me.
Diane Kauffmann
Country Roads Guitars
countryroadsguitars@gmail.com
Kbore
Posts: 299
Joined: Sun Jun 25, 2017 3:58 pm
Location: St. Louis area

Re: Torrefied tops - Membership Benefit

Post by Kbore »

Thank you, I'm going to consider that for my rosette.
Measure Twice,

Karl B
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Torrefied tops - Membership Benefit

Post by tippie53 »

another point is that it doesn't add water
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply