Oscillating Spindle Sander

[mnmusic]

Does anyone have a recommendation for an oscillating spindle sander?

Thanks.

[tippie53]

ridgid for a light use and jet for heavy use.
I used a ridgid for about 3 yrs till I fried it.

My Ridgid is still going strong after ten years of use.

[glasalle1]

I have this one:
http://www.grizzly.com/products/Benchto ... nder/G0723

It does the job. If I had more $, would have gotten a better one - Prob the Jet.

Glenn

[mnmusic]

ridgid for a light use and jet for heavy use.
I used a ridgid for about 3 yrs till I fried it.

Which Jet one do you recommend? I only want to buy this once, but money is still a consideration.

Thanks.

[tippie53]

there are 2 that would do the trick this is a bench style

http://www.cpojettools.com/jet-708404-j ... et-sanders
this is the floor model


http://www.cpojettools.com/jet-708411-j ... et-sanders

[mnmusic]

Thanks John. I would be going for the bench model. The floor model is a bit out of my range.

[justrfb]

Hello All.
These were way out of my budget and I don't have the floor or bench space so I went with these that go into my drill press...

http://www.amazon.com/DELTA-17-940-25-P ... indle+sand

I am sure the real machine works better but these worked for me.

Sincerely,
Rich

[Ben-Had]

I got a spindle sander and don't like it (it seems to leave vertical grooves from the up stroke). I had this already and much prefer it.

http://www.luthiersfriend.com/