How to post photos:
viewtopic.php?f=13&t=270
binding tower info needed
-
Dave Sayers
- Posts: 85
- Joined: Thu Mar 28, 2013 8:19 am
Re: binding tower info needed
I like the bit about prototypes. I seem to make more of them than anything else.
-
watergunn
- Posts: 277
- Joined: Fri Nov 25, 2011 10:20 am
- Location: Cumming, GA
Re: binding tower info needed
I have used the Flieschman machine on the last four I have built. One was a D45 with muitiple purfling and binding channels to be cut. All you do is level the guitar to the work surface. Make a couple of test cuts and then cut the channels.
Pretty much idiot prooof which is a plus for this idiot!
I did the cuts on an OM42 last night. Very quick and accurate.
I thought about a tower but I liked the freedom of the articulating arm.
RG
Pretty much idiot prooof which is a plus for this idiot!
I did the cuts on an OM42 last night. Very quick and accurate.
I thought about a tower but I liked the freedom of the articulating arm.
RG