Pore Filling station
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Pore Filling station
After making my new vacuum clamp I converted an old fixture to make a new stand to pore fill. I use the clamp to hold the body in place. It is on a turn table so once I'm done with one side I spin it 180 and do the other side. The little swivel stop blocks keep in place nicely. It's at the perfect height for me to do the work as well. I used it this afternoon and it worked great.
You do not have the required permissions to view the files attached to this post.
Tim Benware
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Pore Filling station
cool jig
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1668
- Joined: Fri Jul 30, 2010 6:44 pm
- Location: Arkansas