http://www.ptscoshop.com/starbond_cyano ... lue%29.htm
I use a few items that I really like and trust. This is one of them. Starbond CA is really the best stuff out there and comes in different viscosity .
The people are friendly to deal with. All top notch. Anyone else using this stuff feel free to chime in.
glues CA
-
- Posts: 7011
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
glues CA
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1668
- Joined: Fri Jul 30, 2010 6:44 pm
- Location: Arkansas
Re: glues CA
I haven't yet tried this brand but I would like to. Back when I built RC controlled airplanes I used a lot of CA glue and found I liked Carl Goldberg (CG) the best. I was surprised at the difference in CA between mfgs. CG is not cheap so If the Starbond works as well then I would like to try it.
One tip I'll give about CA glue. Keep it in the refrigerator! It will last a lot, lot longer. If you buy a larger bottle, it would be nice to keep an older, smaller bottle that goes in/out of the fridge for daily use and leave the large bottle in the fridge till time to refill the smaller bottle.
One tip I'll give about CA glue. Keep it in the refrigerator! It will last a lot, lot longer. If you buy a larger bottle, it would be nice to keep an older, smaller bottle that goes in/out of the fridge for daily use and leave the large bottle in the fridge till time to refill the smaller bottle.
Slacker......
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: glues CA
I've used Starbond for over 2 years now and have had no problems. I would like to find the best type bottles to use though. Mine keep getting gunked up.
Tim Benware
-
- Posts: 506
- Joined: Tue Sep 06, 2011 2:51 pm
- Location: Bothell, WA USA
Re: glues CA
I use various types of CA.. mostly Dave Smith, becaues it's available locally.
I don't worry about the bottles, because I don't use them as applicators. I use small pipettes to apply the glue. Accurate, inexpensive and disposable.
They are only inexpensive if you don't buy them from specialty shops (model building, etc...).
I get mine from this nice lady..
http://www.rachelssupply.com/pipette.htm
I don't worry about the bottles, because I don't use them as applicators. I use small pipettes to apply the glue. Accurate, inexpensive and disposable.
They are only inexpensive if you don't buy them from specialty shops (model building, etc...).
I get mine from this nice lady..
http://www.rachelssupply.com/pipette.htm
My poorly maintained "Blog"
-
- Posts: 67
- Joined: Sat Sep 03, 2011 5:39 pm
Re: glues CA
I get pipettes here. Good price. Good Qty
http://www.ereinc.com/Browse/SearchProd ... 1/pipettes
Love the concept of disposable. :-)
http://www.ereinc.com/Browse/SearchProd ... 1/pipettes
Love the concept of disposable. :-)
Winston (Kip) Scoville
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: glues CA
EXCELLENT (as my current supply is running low), thanks.Winston_S wrote:I get pipettes here. Good price. Good Qty
http://www.ereinc.com/Browse/SearchProd ... 1/pipettes
Love the concept of disposable. :-)
Tim Benware