Bridge pin hole reamers
-
- Posts: 277
- Joined: Thu Nov 11, 2010 11:10 pm
- Location: Ottawa, ON
Bridge pin hole reamers
They're expensive. LMI has 3 deg and 5 deg. Which one is best / more common. I don't want to have to buy both.
Alain
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Bridge pin hole reamers
the 3 degree is most common
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Re: Bridge pin hole reamers
Check out Grizzly.com for a reasonably priced 3 deg. reamer.
tommy
tommy
-
- Posts: 296
- Joined: Wed Nov 02, 2011 9:13 pm
- Location: Sacramento, CA USA
Re: Bridge pin hole reamers
I've already got a violin-peg reamer. It has a 1/30 taper, which my toy drawing program renders as 1.91 degrees (that's the angle between the cutting edge of the reamer and the long central axis of the reamer itself, I presume). But that got me to wondering how the degrees in a reamer are calculated ... is that the angle the face is from the central axis of the reamer, or the angle formed by the faces of the cone (i.e the cutters)?
-
- Posts: 43
- Joined: Tue Aug 17, 2010 7:44 pm
Re: Bridge pin hole reamers
You can buy them on ebay cheap.
Re: Bridge pin hole reamers
Ace hardware carries one for $10.
Re: Bridge pin hole reamers
Do you have a link? I can't find any on ebay. Thanks.Guitar Hack wrote:You can buy them on ebay cheap.
tommy