HF scroll saw
HF scroll saw
Spotted a scroll saw - 16" - at HF for $79.00.
Is there a chance that it is a good one for what we do?
DaveB
Or can you give me a recommendation?
Is there a chance that it is a good one for what we do?
DaveB
Or can you give me a recommendation?
-
- Posts: 827
- Joined: Thu Aug 12, 2010 9:11 pm
Re: HF scroll saw
I considered one because I found a deal on a used one. I was going to use it for cutting out tops and backs. I opted for a coping saw because I had one on hand. Cheap, easy and pretty fast.
Re: HF scroll saw
Cheap, easy and pretty fast..
Gee Tony, sounds like an ideal woman! :-)
DaveB
Gee Tony, sounds like an ideal woman! :-)
DaveB
-
- Posts: 608
- Joined: Mon Mar 13, 2006 12:34 am
- Location: Wilmette, IL
Re: HF scroll saw
There have been times I thought it would be useful to have one, especially if I were dong wood inlay, but I always made do with what I had instead.
Ken Hundley
Nocturnal Guitars
http://www.nocturnalguitars.com
So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
Nocturnal Guitars
http://www.nocturnalguitars.com
So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
-
- Posts: 827
- Joined: Thu Aug 12, 2010 9:11 pm
Re: HF scroll saw
But that post is for another forum entirely!deadedith wrote:Cheap, easy and pretty fast..
Gee Tony, sounds like an ideal woman! :-)
DaveB
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: HF scroll saw
Hey , stop talkin about my sister . HF tools are hit and miss on quality. If you have the room a small band saw may be more useful. I had a few scroll saws and found them of little use . Still if you are limited on space you may need to use on. I would look at a better piece. You can find good used ones for the same $$$.
just my 2 cents
just my 2 cents
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Re: HF scroll saw
I bought the Scroll Saw from HF made by Continental. I used it on my last guitar for trimming the finger board. It's not easy since there is no fence to help guide your work. I agree if you have enough room, a Band Saw is much better. It is still a good tool.
Re: HF scroll saw
I've got plenty of room, and I have a band saw - though I need a better one - so my money should probably go for the better band saw.
Thanks for input.
DaveB
Thanks for input.
DaveB