- Posts: 135
- Joined: Thu Jul 09, 2015 7:46 pm
- Location: Arlington, WA
- Posts: 1355
- Joined: Wed Aug 13, 2014 12:14 pm
Apply the binding before installing the frets. You'll have to remove a bit the tang at each end of the frets so the binding doesn't interfere with seating the frets in their slots.
StewMac sells a clipper made just for this, or you can use whatever ypu may have that works.
Anything is possible if you don't know what you are talking about.
When things are bad, try not to make them any worse, because it is quite likely they are bad enough already. - French Foreign Legion