www.KitGuitarsForum.com
http://www.kitguitarsforum.com/board/

Which radius for lining sanding disk to match StewMac kit?
http://www.kitguitarsforum.com/board/viewtopic.php?f=3&t=8305
Page 1 of 1

Author:  patrickb [ Sun Nov 26, 2017 1:30 pm ]
Post subject:  Which radius for lining sanding disk to match StewMac kit?

Stew Mac instructions for their acoustic guitar kit shows creating a sanding stick with a 5 degree wedge on one side and a 1.5 degree wedge on the other side to sand the back and top kerfed linings. If I wanted to get the Concave Luthier Disks from Blues Creek Guitars to use in stead of the stick which radius would match 5 degrees and also 1.5 degrees? Thanks!

Author:  tippie53 [ Sun Nov 26, 2017 8:03 pm ]
Post subject:  Re: Which radius for lining sanding disk to match StewMac ki

I use 15 on the back 28 on the top but the key isn't to radius the entire top only a portion of it that holds the fret board extension so your neck angle lays on the top in a straight line. Feel free to call me I will be happy to talk you through this.
Here is a link to my video

https://www.youtube.com/watch?v=LrgRKKsxL-M

Author:  patrickb [ Tue Nov 28, 2017 10:23 am ]
Post subject:  Re: Which radius for lining sanding disk to match StewMac ki

Thanks, John!

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/