Which radius for lining sanding disk to match StewMac kit?

General Information about Building Kit Guitars
Post Reply
patrickb
Posts: 4
Joined: Sat Nov 25, 2017 9:26 pm

Which radius for lining sanding disk to match StewMac kit?

Post by patrickb »

Stew Mac instructions for their acoustic guitar kit shows creating a sanding stick with a 5 degree wedge on one side and a 1.5 degree wedge on the other side to sand the back and top kerfed linings. If I wanted to get the Concave Luthier Disks from Blues Creek Guitars to use in stead of the stick which radius would match 5 degrees and also 1.5 degrees? Thanks!
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Which radius for lining sanding disk to match StewMac ki

Post by tippie53 »

I use 15 on the back 28 on the top but the key isn't to radius the entire top only a portion of it that holds the fret board extension so your neck angle lays on the top in a straight line. Feel free to call me I will be happy to talk you through this.
Here is a link to my video

https://www.youtube.com/watch?v=LrgRKKsxL-M
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
patrickb
Posts: 4
Joined: Sat Nov 25, 2017 9:26 pm

Re: Which radius for lining sanding disk to match StewMac ki

Post by patrickb »

Thanks, John!
Post Reply