Getting Started
Re: Getting Started
Thank you. I am also trying to find what radius the 000-28 has for the back.
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Getting Started
15 foot for the backs on martin 000 OM
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1668
- Joined: Fri Jul 30, 2010 6:44 pm
- Location: Arkansas
Re: Getting Started
Interesting. I read somewhere (back before I had a radius dish) that Martin uses a 16' back radius for a 000 sized body and a 20' back radius for a dreadnaught sized body. I ended up with a 16' radius dish and planned to use it on both size bodies. Hardly any difference between the two, but that's what I understood at the time.tippie53 wrote:15 foot for the backs on martin 000 OM
Slacker......
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Getting Started
sorry
the backs are 15 and your correct 20 on the dred but it really don't matter much .
the backs are 15 and your correct 20 on the dred but it really don't matter much .
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com