Page 1 of 1

mold for a Martin CEO-7

Posted: Sat Jul 23, 2016 5:32 pm
by thronson
In looking at the list of martin molds on the Blues Creek website. not seeing a 00-14 Sloped Shoulder offering... someday or year I was thinking of getting a CEO-7 type kit....
With MartinFest 2016 coming up very shortly... prehaps some templates might be floating around there and can find their way to BCreek....
Hope the temperature cools down in Aug. and all goes well at MartinFest 2016.

t

Re: mold for a Martin CEO-7

Posted: Sat Jul 23, 2016 6:12 pm
by tippie53
I will see if I can get a tracing from Martin

Re: mold for a Martin CEO-7

Posted: Sat Jul 23, 2016 10:14 pm
by Danl8
tippie53 wrote:I will see if I can get a tracing from Martin
I have a ceo-7 body I can trace for you if needed.

thanks I can use that

Re: mold for a Martin CEO-7

Posted: Sun Jul 24, 2016 10:15 pm
by Danl8
Danl8 wrote:
tippie53 wrote:I will see if I can get a tracing from Martin
I have a ceo-7 body I can trace for you if needed.

thanks I can use that
I will get it out in tomorrows mail. Here's what i did; creased the paper on the edge and rode the pencil lead on the binding edge. Hope that is good enough.

Re: mold for a Martin CEO-7

Posted: Sat Jul 30, 2016 8:40 pm
by tippie53
tracing is here I will make a master and will have that mold shortly