mold for a Martin CEO-7

General Information about Building Kit Guitars
Post Reply
thronson
Posts: 85
Joined: Tue Jul 01, 2014 6:37 pm
Location: Napa, CA

mold for a Martin CEO-7

Post by thronson »

In looking at the list of martin molds on the Blues Creek website. not seeing a 00-14 Sloped Shoulder offering... someday or year I was thinking of getting a CEO-7 type kit....
With MartinFest 2016 coming up very shortly... prehaps some templates might be floating around there and can find their way to BCreek....
Hope the temperature cools down in Aug. and all goes well at MartinFest 2016.

t
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: mold for a Martin CEO-7

Post by tippie53 »

I will see if I can get a tracing from Martin
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Danl8
Posts: 733
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: mold for a Martin CEO-7

Post by Danl8 »

tippie53 wrote:I will see if I can get a tracing from Martin
I have a ceo-7 body I can trace for you if needed.

thanks I can use that
Danl8
Posts: 733
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: mold for a Martin CEO-7

Post by Danl8 »

Danl8 wrote:
tippie53 wrote:I will see if I can get a tracing from Martin
I have a ceo-7 body I can trace for you if needed.

thanks I can use that
I will get it out in tomorrows mail. Here's what i did; creased the paper on the edge and rode the pencil lead on the binding edge. Hope that is good enough.
You do not have the required permissions to view the files attached to this post.
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: mold for a Martin CEO-7

Post by tippie53 »

tracing is here I will make a master and will have that mold shortly
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply