parlor size classical guitar plans?

Post Reply
JLT
Posts: 296
Joined: Wed Nov 02, 2011 9:13 pm
Location: Sacramento, CA USA

parlor size classical guitar plans?

Post by JLT »

After having completed "Fishwrap," my steel-string parlor guitar, I'm thinking now of making a classical guitar in a similar size. Are there plans out there for this sort of thing?

I can use the Scott Antes plans up to a point, of course, and just use fan bracing instead of X-bracing, but I'm not sure how much I'd want to rely on my ability to scale down full-sized plans.
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: parlor size classical guitar plans?

Post by tippie53 »

Antes plans are some of the worst out there but you certainly can use them for the base. Remember that your top will be thinner . You can make it work just use better top brace plans than antes.
hauser or ramirez may be used to plot top bracing
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Danl8
Posts: 733
Joined: Mon Jul 28, 2014 7:50 am
Location: Chadds Ford, PA

Re: parlor size classical guitar plans?

Post by Danl8 »

The 1888 Torres is about parlor size. lMII sells a measured drawing, I believe.
JLT
Posts: 296
Joined: Wed Nov 02, 2011 9:13 pm
Location: Sacramento, CA USA

Re: parlor size classical guitar plans?

Post by JLT »

Danl8 wrote:The 1888 Torres is about parlor size. lMII sells a measured drawing, I believe.
Thanks! I'll check that out.
Post Reply