Martin Bridge Wing Thickness
-
- Posts: 1668
- Joined: Fri Jul 30, 2010 6:44 pm
- Location: Arkansas
Martin Bridge Wing Thickness
How thick are the wings on a factory Martin bridge? Are the wings the same no matter the bridge height in the center? Finally, is a standard bridge used on the Norman Blake model? Minimal overlap of bridge wings over the X brace is why I ask.
Slacker......
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Martin Bridge Wing Thickness
.120 to .130
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 1668
- Joined: Fri Jul 30, 2010 6:44 pm
- Location: Arkansas
-
- Posts: 1405
- Joined: Fri Sep 03, 2010 2:14 pm
- Location: Creedmoor, NC
Re: Martin Bridge Wing Thickness
You may also be interested in this:Darryl Young wrote:How thick are the wings on a factory Martin bridge? Are the wings the same no matter the bridge height in the center? Finally, is a standard bridge used on the Norman Blake model? Minimal overlap of bridge wings over the X brace is why I ask.
http://www.stewmac.com/freeinfo/Bridges ... gauge.html
Tim Benware
-
- Posts: 1668
- Joined: Fri Jul 30, 2010 6:44 pm
- Location: Arkansas