Hormigo Back and Side Set

Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Hormigo Back and Side Set

Post by Darryl Young »

Think the Hormigo set below would be ok for building a guitar? Think the sides would bend ok?

Image
Slacker......
Ben-Had
Posts: 1405
Joined: Fri Sep 03, 2010 2:14 pm
Location: Creedmoor, NC

Re: Hormigo Back and Side Set

Post by Ben-Had »

From RC Tonewood site:

Hormigo Botanical Name: (Platymiscium Dimorpandrun) The Hormigo is a tree that grows in humid forest zones. It is used commonly to make musical instruments, such as the keys of the marimba. Its wood is reddish with clear pigmentation, it is strong and compacted, durable and beautiful sounding when struck. It grows in Belize, Guatemala, El Salvador and Honduras. We are amazed with the beauty of this wood. It is sometimes called "the wood that sings".
Tim Benware
johnnparchem
Posts: 2354
Joined: Sat Apr 10, 2010 10:50 pm
Location: Seattle
Contact:

Re: Hormigo Back and Side Set

Post by johnnparchem »

It looks way cool. I have no knowledge about it though.
Ken Hundley
Posts: 608
Joined: Mon Mar 13, 2006 12:34 am
Location: Wilmette, IL

Re: Hormigo Back and Side Set

Post by Ken Hundley »

Beautiful wood! I wouldn't hesitate to try it, but I like the unconventional.
Ken Hundley
Nocturnal Guitars
http://www.nocturnalguitars.com

So, my big brother was playing guitar and I figured I'd try it too.
- Stevie Ray Vaughan
Zen
Posts: 301
Joined: Sat May 26, 2012 12:35 pm
Location: Ireland

Re: Hormigo Back and Side Set

Post by Zen »

Ken Hundley wrote:Beautiful wood! I wouldn't hesitate to try it, but I like the unconventional.

I just used Ovankol back and sides which was hard enough to bend but sounds amazing so I would go for this if I was in your shoes --but I like to take a chance sometimes. Good luck with it.
RUSTY
Kevin Sjostrand
Posts: 3718
Joined: Sat Feb 09, 2008 8:06 pm
Location: Visalia, CA

Re: Hormigo Back and Side Set

Post by Kevin Sjostrand »

That is pretty sweet stuff Darryl, I would go for it. Can't be too tough to bend.

Kevin
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: Hormigo Back and Side Set

Post by Darryl Young »

Well, I went for it but didn't win the auction. That's bad enough but earlier I missed out on a less figured but nice QS set. I offered plenty to buy the set but I made the offer from my phone in the last 30 sec and the auction expired before it updated. Oh well.
Slacker......
 

Re: Hormigo Back and Side Set

Post by   »

Darryl,
Have you seen this Hormigo set from Waldron?
Image

-tommy
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: Hormigo Back and Side Set

Post by Darryl Young »

No, I haven't seen that set. It's pretty but those flat sawn sides have me leary. Even the back is mostly flat sawn.
Slacker......
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: Hormigo Back and Side Set

Post by Darryl Young »

Finally scored a set of Hormigo in an auction. It's not as pretty as some of the Hormigo sets I've seen.......but the sides are quartersawn and the back is quartered and drifts off to rift/flat near the outside edge. Overall, I'm happy to get a set and try it. I may use it when I build my first "Baby Dred" if it lives up to expectations. Here is a pic:
HormigoBackSideSet.jpg
You do not have the required permissions to view the files attached to this post.
Slacker......
Post Reply