Up for sale is a lot of six Solid Carbide Inlay Bits that were purchase from Blues Creek Guitars. There are two of each of the following sizes: 3/32", 1/32" and 0.20". They are are upcut bits as recommended by John at Blues Creek. One of them was used very briefly but I don't recall which one. SOLD
Thanks,
Scott
FS- Solid Carbide Inlay Bits (Lot of 6) SOLD
-
- Posts: 48
- Joined: Wed Jan 18, 2012 3:36 pm
FS- Solid Carbide Inlay Bits (Lot of 6) SOLD
Last edited by Metalone72 on Fri Aug 26, 2016 8:47 am, edited 1 time in total.
-
- Posts: 3721
- Joined: Sat Feb 09, 2008 8:06 pm
- Location: Visalia, CA
Re: FS- Solid Carbide Inlay Bits (Lot of 6) Sale Pending
Scott, are those 1/8" shanks?
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: FS- Solid Carbide Inlay Bits (Lot of 6) Sale Pending
yes those are 1/8 shank
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com