Oak picture frames from the lutherie bench

Talk About Anything Here, Anything At All
Post Reply
jread
Posts: 560
Joined: Wed Feb 13, 2019 9:52 am
Contact:

Oak picture frames from the lutherie bench

Post by jread »

About a week before Christmas I realized I needed to up my gift game and wanted to see if I could make some nice picture frames with my bench setup for lutherie. John Hall's Fleishman Binding Machine made cutting the slot for the art and glass was easy as could be. Here's an easy frame to make if you are setup for guitars for sure!

joinery: pinned half-lap joint. Tightbond 1, w/ 1/4" oak dowels.
insert: I had fun routing the back with John Hall's binding machine.


original plans: https://www.popularwoodworking.com/proj ... man-frame/

I wanted to show show how quickly they can be made on your guitar benches.

steps:
1) rip rails and stiles to width and thickness or use a planer to thickness.
2) Use dado blade with sled to setup cuts. (sorry,dado blades are not generally in lutherie but the table saw is.)
3) To mass produce frames: Cut all frames at each saw setup using a stop block, then repeat that cut on all frames before moving the block.
4) use binding machine with binding slot bit to cut slot in back. ( or router table, or hand router. ) I used my smallest bearing and the glass just fit in. See plans.
5) sand,dye or stain, finish[/list]
6) pre-cut mats and glass makes it easy. Just test to ensure it fits after cutting with the router.
You do not have the required permissions to view the files attached to this post.
jread
Posts: 560
Joined: Wed Feb 13, 2019 9:52 am
Contact:

Re: Oak picture frames from the lutherie bench

Post by jread »

One more closeup. Nice frames are expensive. This is a good, cheap frame. The pre-cut mats are under $10, and I got the glass cut at the local hardware for $1.99 each.

I used 3/4" quarter-sawn oak and planed down the thinner pieces. This would look good in a lot of of other species I bet.
You do not have the required permissions to view the files attached to this post.
TEETERFAN
Posts: 342
Joined: Fri Sep 07, 2018 12:43 pm
Location: Kansas City, MO

Re: Oak picture frames from the lutherie bench

Post by TEETERFAN »

Wonderful work. I like the tasteful simplicity of those. It is nice to work on something that can be completed fairly quickly and is a tad less critical than a guitar!
Kevin Doty
Kansas City
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Oak picture frames from the lutherie bench

Post by tippie53 »

interesting to see other uses. I just sold a bender to a mechanic that is making new wings for a vintage era airplane.
thanks for posting
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Skarsaune
Posts: 239
Joined: Mon Dec 03, 2018 9:12 am

Re: Oak picture frames from the lutherie bench

Post by Skarsaune »

Good stuff.

When we moved to our farm, there was a stack of oak hardwood flooring in the barn. Not

Been making pictures frames and other goodies out of that stack for quite a while now.
carld05
Posts: 170
Joined: Mon Mar 19, 2012 4:19 pm
Location: Forest Ranch, CA

Re: Oak picture frames from the lutherie bench

Post by carld05 »

Here's a frame for a stained glass picture made from a straight (rare!) Manzanita branch harvested from my property. Quartered it and routed a groove for the glass frame. Mitered corners are kinda crude but match the wood.
IMG_20220109_113419_0.jpg
IMG_20220109_113843_1.jpg
You do not have the required permissions to view the files attached to this post.
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: Oak picture frames from the lutherie bench

Post by tippie53 »

love the stained glass interesting frames and I Likes them
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Post Reply