the one safety tip from My father was a big help. Never set the blade higher than you want to get cut. I saw a hand specialist yesterday and was given good news. I should be healed in about 6 to 8 weeks.
be safe
Safety reminder
-
- Posts: 7013
- Joined: Fri Mar 03, 2006 7:09 pm
- Location: Hegins, Pa
- Contact:
Re: Safety reminder
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
-
- Posts: 3252
- Joined: Sun Mar 09, 2014 8:13 pm
Re: Safety reminder
That's good news John. I'm sorry that this happened.
Yesterday I was cutting a neck block out of a chunk of mahogany that was 4" square and 6" long, on the table saw. There was a crack in the center of the chunk that I couldn't see, from some sort of weird growth pattern. The blade hit that spot and a piece kicked back, hard.
I always use the push stick, but after your accident, I'm more conscious about my safety. I make sure to adjust the blade (which I had stopped doing) plus I stand a little oblique, in case a piece flies out.
A piece flew out all right. It knocked the push stick into the saw and a piece shot past me, hitting the opposite wall of the basement, a good 30 feet away. I'm damm glad it didn't hit my hand, arm, or side.
Truthfully, it scared the $%## out of me! It happened so fast that I couldn't react.
I thought I'd never say this; I'm guilty of becoming complacent about tool safety. The more I use the tools, the more comfortable I become with them. If I need a small piece cut, I just run to the bandsaw and do a quick cut. Your accident has given me pause, to reconsider some my safety practices.
The good Lord reminded me of the possible consequences yesterday.
Yesterday I was cutting a neck block out of a chunk of mahogany that was 4" square and 6" long, on the table saw. There was a crack in the center of the chunk that I couldn't see, from some sort of weird growth pattern. The blade hit that spot and a piece kicked back, hard.
I always use the push stick, but after your accident, I'm more conscious about my safety. I make sure to adjust the blade (which I had stopped doing) plus I stand a little oblique, in case a piece flies out.
A piece flew out all right. It knocked the push stick into the saw and a piece shot past me, hitting the opposite wall of the basement, a good 30 feet away. I'm damm glad it didn't hit my hand, arm, or side.
Truthfully, it scared the $%## out of me! It happened so fast that I couldn't react.
I thought I'd never say this; I'm guilty of becoming complacent about tool safety. The more I use the tools, the more comfortable I become with them. If I need a small piece cut, I just run to the bandsaw and do a quick cut. Your accident has given me pause, to reconsider some my safety practices.
The good Lord reminded me of the possible consequences yesterday.