David is off line now

Get Togethers, Workshops, Open Houses (Any Place, Any Size)
DavidRNichols
Posts: 10
Joined: Wed Jan 18, 2012 2:13 pm

David is off line now

Post by DavidRNichols »

David's here ...
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: On Line

Post by Darryl Young »

What area do we go to?......or do we start asking questions in this thread? Does it start at 3:00 Eastern or Central?
Slacker......
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: David is on line now

Post by tippie53 »

do you have skype?
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: David is on line now

Post by Darryl Young »

Yes I do.
Slacker......
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: David is on line now

Post by tippie53 »

David does have skype but feels more comfortable using the phone As you check in please be aware of a PM with a phone number. After you speak to David let us know when your are off so we can allow the next call
thanks agian
john
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
tippie53
Posts: 7011
Joined: Fri Mar 03, 2006 7:09 pm
Location: Hegins, Pa
Contact:

Re: David is on line now

Post by tippie53 »

My scype address is tippie@epix.net
you may post a question also and we will get you an answer
thanks
John Hall
Blues Creek Guitars Inc
Authorized CF Martin Repair Center
president of Association of Stringed Instrument Artisans
http://www.bluescreekguitars.com
mjmeehan
Posts: 191
Joined: Fri Aug 28, 2009 8:58 am
Location: Bethlehem, Pennsylvania

Re: David is on line now

Post by mjmeehan »

I don't have skype so I'll just ask here.

I've used abalam many times but have only used actual abalone pearl once and was afraid of sanding through the color. Is there a way to tell how deep the color runs? or should I inlay the pearl as deep as possible to eliminate this? Sometimes pearl pieces can be pretty thick. Thanks.
Darryl Young
Posts: 1668
Joined: Fri Jul 30, 2010 6:44 pm
Location: Arkansas

Re: David is on line now

Post by Darryl Young »

I'm off the phone now! Thanks.
Slacker......
DavidRNichols
Posts: 10
Joined: Wed Jan 18, 2012 2:13 pm

Re: David is on line now

Post by DavidRNichols »

Talked w/Darrell on the telephone regarding procedures for inlaying around the end of a fingerboard on a 45-style top.
JVan
Posts: 143
Joined: Wed Jan 18, 2012 7:03 pm
Location: White Pigeon, MI

Thank you all

Post by JVan »

I do not have Skype either, Just wanted to say Hello to Mr. David, Love your work you are a true artist!
Post Reply