You are currently viewing Kit Guitar Forum archives. To view the current forums go to www.KitGuitarsForum.com/board



Log-in
Register
Members


Bridge Pin Taper Tool
Author
Post
ejko

Total Topics: 24
Total Posts: 113
Pardon me if I'm asking too many questions, but have any of you come across a low cost tool to ream the correct taper into the bridge after drilling the bridge pin holes?

Thanks!

Ed

Jul 11, 06 | 4:44 pm
Bill Cory

Total Topics: 158
Total Posts: 3584
I bought the one from Stewmac, but try at a Woodcraft store if you have one nearby.

Bill

Jul 12, 06 | 4:17 am
Bill Greene

Total Topics: 0
Total Posts: 7
Sears sells one in their tool section, typically hanging on the wall for just a few bucks. It's a nearly perfect taper, cheap and is made of all steel. Very nice.

Jul 12, 06 | 2:15 pm
ejko

Total Topics: 25
Total Posts: 113
Bill (and Bill),

The Sears model sounds like just what I'm looking for.

We have both a Klingspor and Woodcraft in the area; I'll use these as backup if the Sears plan doesn't work out.

Thanks a bunch!

Ed

Jul 12, 06 | 3:24 pm



You must be a registered and logged in member to post in this forum